background image

CORDLESS DRIVER DRILL

6

such as nails, coins, etc.
3.Do not expose battery cartridge to water or rain. A battery short can cause 
a large current flow, overheating, possible burns and even a breakdown.
-Do not store the tool and battery cartridge in locations where the 
temperature may reach or exceed 500 C (1220 F).
-Do not incinerate the battery cartridge even if it is severely damaged or 
is completely worn out. The battery cartridge can explode in a fire.
-Be careful not to drop or strike battery.
-Do not use a damaged battery.

TIPS FOR MAINTAINING MAXIMUM BATTERY LIFE

-Charge the battery cartridge before completely discharged. Always stop tool 
operation and charge the battery cartridge when you notice less tool power.
-Never recharge a fully charged battery cartridge. Overcharging shortens 
the battery service life.
-Charge the battery cartridge with room temperature at 100C - 400C 
(500F - 1040F). Let a hot battery cartridge cool down before charging it. 

LIGHTING UP THE FRONT LAMP

CAUTION:

Do not look in the light or see the source of light directly. Pull the switch 
trigger to light up the lamp. The lamp keeps on lighting while the switch 
trigger is being pulled.

Lamp

NOTE:

Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to 
scratch the lens of lamp, or it may lower the illumination.

Содержание 8905K
















Отзывы: