Ronix 4645PRO, Руководство пользователя

Страница: 10 / 37

GASOLINE CHAIN SAW
9
saw handles.
11) Keep all parts of your body away from the saw chain when the
engine is running. Before you start the engine, make sure the saw chain
is not contacting anything.
12) Always carry the chain saw with the engine stopped the guide bar
and saw chain to the rear, and the muffler away from your body.
13) Always inspect the chain saw before each use for worn, loose, or
changed parts. Never operate a chain saw that is damaged, improperly
adjusted, or is not completely and securely assembled.
Be sure that the saw chain stops moving when the throttle control trigger
is released.
14) All chain saw service, other than the items listed in the Operator’s
manual, should be performed by competent chain saw service personnel.
(e.g., if improper tools are used to remove the flywheel, or if an improper
tool is used to hold the flywheel in order to remove the clutch, structural
damage to the flywheel could occur which could subsequently cause the
flywheel to disintegrate).
15) Always shut off the engine before setting it down.
16) Use extreme caution when cutting small size brush and saplings
because slender material may catch the saw chain and be whipped
toward you or pull you off balance.
17) When cutting a limb that is under tension, be alert for spring back so
that you will not be struck when the tension in the wood fibers is released.
18) Keep the handles dry, clean and free of oil or fuel mixture.
19) Guard against kickback. Kickback is the upward motion of the guide
bar which occurs when the saw chain at the nose of the guide bar
contacts an object. Kickback can lead to dangerous loss of control of
the chain saw.
20) When transporting your chain saw, make sure the appropriate guide
bar scabbard is in place. Securely place the machine during transport to
prevent loss of fuel, damage or injury.