8
DEMOLITION HAMMER
7) Do not use in following area: it is prohibited to use in special
circumstance of moist heat, snowy, explosive or corrosive gas
area.
8) Correctly use the plug; do not exchange the plug arbitrarily;
do not insert the plug that directly connected with the bare
conductor into socket.
9) Do not connect the power cord arbitrarily; It is prohibited to
joint or exchange the length power arbitrarily; do not move the
unit by pulling the power cord; do not contact the power cord with
the power source and oil materials for preventing the phenomena
of the damages of cable abrasion and shears broken.
10) To disconnect the plug promptly; disconnect the plug in
case of the machine is idle or replacing the cutting tool and
components, so as to prevent the electric shock.
OPERATION AND MAINTENANCE
1) Chisel bits and drill bits may be flung out of the machine
accidentally and cause serious injury:
2) Before starting to work, always check that the chisel or drill bit
is properly locked in the chuck.
3) Examine the chuck regularly for signs of wear or damage.
4) Never start up a hammer tool until it pressed against a work
piece (wall, ceiling, etc.).
5) When you are finished, unplug the hammer drill from the electric
supply and remove the chisel or drill bit from the machine.
6) Always disconnect the hammer drill from the electric supply
before you change a chisel or drill bit.
7) Protect your eyes and other workers from flying particles and
splinters. Wear an eye protection!
8) Wear work gloves to protect fingers from bruising and grazing.
