REV. Q: DATE: DEC 10 2020
4
Rotate the Red Tensioner Knob fully to the Left, until the lever
arm is bottomed out on the main housing.
Insert the rope into the “Rope Inlet” hole. Push the rope into
the rope inlet hole and TAP the thumbwheel. The rope should pull
into the system 2-3 inches.
Now open the brake slightly and slowly roll down the
thumbwheel, until the rope comes out of the rope exit hole (Pull
Deadman trigger, if unit is equipped with this option).
Note: Do not pull the brake fully open or this will activate reverse
function. If this happens, then repeat the previous step
Once rope has fed out the exit hole, turn the Red Tensioner
Knob to the Right, until hand tight, before ascending.
Ronin Lift New User Guide
PN: 2805-11
Rope Loading
Turn knob Fully to the Left
Rope Inlet Hole
Brake
Handle
Turn knob right
until you start to
feel resistance
and then go hand
tight