Ronin Lift New User Guide
PN: 2805-11
General inspection of device to ensure there is no major damage or deformation. (Note:
Scratches and/or general wear & tear is acceptable).
Inspect rope prior to use and ensure rope is in acceptable climbing condition. Be sure BOTH
ends of your rope are properly burned with any tape or markers removed. No inner core should
be exposed and BOTH rope tips should be coned.
(Note: If you have a Tech-Nora or Kevlar
sheathed rope, then ask Ronin about the Perfect Burn Tip).
Inspect all PPE (Personal Protective Equipment) before use.
Ronin Approved Ropes
3
REV. Q: DATE: DEC 10 2020
1: Ronin HP Rope (MFG. Marlow) – 11.5 mm Dia.
2: Marlow – ProTech 500 – 11.0 mm Dia.
3: Sterling – Tech 125 – ½” Dia.
4: Yale Cordage – R.I.N.G. – 11.5 mm Dia.
5: Yale Cordage – Scandere – 11.7 mm Dia.
6: Sterling HTP Red – 13mm Dia.
7: Sterling WorkPro – ½” Dia.
8: Teufelberger – X-Static – 11.7 mm Dia.
9: Teufelberger – KM III Max – 11 mm Dia.
10: Pelican Rope – White Rope – 11 mm Dia.
11: Sterling – Element – ½” Dia.
12: Yale Cordage – Calamine – 11.7 mm Dia.
13: Sterling – Element – ½” Dia.
14. Sterling – Scion – 11.5 mm Dia.
15. PMI – E-Z Bend – 11 mm Dia.
16: Pelican Rope – 1WPP-160L54-001 – ½” Dia.
17. Teufelberger – Platinum Protect PES/PA – 11 mm Dia.
18: Yale Cordage – XTC-16 – 13 mm Dia.
19. PMI – EZ Bend Hudson Classic - 12.5 mm Dia.
20. Scion – Arbor Climbing Line – 12.5 mm Dia.
•
Rope Type:
Static Rope
•
Rope Diameter:
10 mm –13 mm
•
Rope Diameter Shrinkage:
Cannot
shrink below 10 mm under loaded
conditions
•
Sheath Construction:
Tech-
Nora/Aramid Preferred
(Kernmantle is acceptable)
•
Rope Elongation:
Less than or equal
to 2% at 300 lbs. for 10 mm –11.5
mm. Less than or equal to 3.3% at
300 lbs. for 11.6 mm –13.0 mm
•
Plait Count:
Preferred 32 or 48 Plait
(16 and 24 are acceptable)
Contact [email protected]c for any
questions you have.
Minimum
Requirements
For Untested
Ropes
