RONDELL RDE-1301, Инструкция по эксплуатации

Страница: 5 / 24

5
ENGLISH
– do not touch the water;
– unplug the unit immediately, only after that you may take
the unit out of water;
– apply to the authorized service center for testing or
repairing the unit.
•
If the power cord is damaged, it should be replaced by the
manufacturer, a maintenance service or similar qualified
personnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit, if any malfunction is detected or after it was dropped,
unplug the unit and apply to any authorized service center
from the contact address list given in the warranty certifi-
cate and on the website www.rondell.ru.
•
To avoid damages, transport the unit in the original pack-
age only.
•
Keep the unit out of reach of children and disabled per-
sons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS
AND WORK SPACES IS PROHIBITED.
BEFORE USING THE UNIT
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Before using the unit wash the attachments (1, 8 or 11), the
chopper bowl (7) and the measuring cup (10) with warm
water and a neutral detergent and dry them thoroughly.
•
Wipe the motor unit (3), the geared lid (9) and the whisk
attachment gear (12) with a soft slightly damp cloth and
then wipe them dry.
ATTENTION!
•
Do not immerse the motor unit (3), the chopper geared
lid (9), the whisk attachment gear (12), the power cord and
the power plug into water or any other liquids.
•
Do not put the attachments and the bowls in a dishwash-
ing machine.
Continuous operation time
The blender set allows quick and effective operation, but
continuous operation time should not exceed 1 minute while
using the blender attachment (1), 90 seconds while using the
whisk attachment (11) and 10 seconds while chopping hard
foodstuffs in the chopper bowl (7). Make at least a 2-minute
break between operation cycles.
USING THE BLENDER ATTACHMENT
Use the detachable blender attachment (1) for making fruit
puree, baby food, sauces, mayonnaise, for mixing various
ingredients and making cocktails (for processing fruit and
vegetables containing enough liquid).
WARNING: Before installing the attachment (1), make sure
that the power plug is not inserted into the mains socket.
– Insert the detachable blender attachment (1) into the
motor unit (3), and turn it counterclockwise until bump-
ing, make sure that the attachment is fixed properly.
– Insert the power plug into the mains socket.
– Immerse the blender attachment (1) into the bowl with
food that you want to chop/mix.
Note: You can put the foodstuffs into the measuring
cup (10).
Selection of attachment rotation speed:
– Use the attachment rotation speed control knob (6) to
change the attachment rotation speed. Press and hold
down the button (5), select the required attachment rota-
tion speed by turning the speed control knob (6).
– For operation at the maximal rotation speed, press and
hold down the “TURBO” button (4).
ATTENTION!
While processing products keep the unit vertically.
– To switch the unit on, press and hold down the button (5).
Use this operation mode for mixing liquid products. Turn
the attachment rotation speed control knob (6) to change
the attachment (1) rotation speed.
– If you press and hold down the «TURBO» button (4), the
unit will operate at maximum rotation speed. Use this
operation mode for combined processing of liquid and
solid foodstuffs.
Notes:
– Products should be put into the bowl before the unit is
switched on. The amount of products to be processed
should not exceed 2/3 of the capacity of the bowl in
which they are processed.
– Before starting to chop/mix, we recommend to peel fruit,
remove inedible parts, such as stones, and cut fruit into
cubes approximately 2х2 cm in size.
– After you finish using the unit, take the power plug out
of the mains socket and remove the detachable blender
attachment (1), turning it clockwise.
ATTENTION!
– Do not remove the blender attachment (1) during oper-
ation.
– To avoid damaging the blades, do not process too hard
products such as cereals, rice, spices, coffee beans,
hard cheeses, frozen products etc.
– If the foodstuffs are hard to chop with the blender attach-
ment (1), add some liquid if possible.