Ronch Ronch Weld Series, Руководство пользователя, Страница: 11 / 13

11
8. Maintenance
The following operations require the operator has sufficient electrical expertise and
comprehensive Safety knowledge, the operator can demonstrate its capacity to be held
valid qualifications and knowledge Documents. Make sure to open the case welding
power input cable power input cable has broken.
(1) Periodic inspection welding internal circuit connections, make sure connections are
correct and reliable connection, (especially the joints or components). If any rust and
loose application of sanding off rust layer and the oxide film, reconnect, and tighten.
(2) The machine power, do not allow hands, hair and tools near live components inside
the machine, such as: fans, so as mot to hurt or cause damage to the machine.
(3) Regularly with a clean dry compressed air to dust the machine, compressed air
pressure should be at reasonable levels in order to avoid damage to the welding of small
components inside. Dust the machine works well, no dust under normal circumstances
(except in exceptional circumstances).
(4) Avoid water or water vapor into the welding machine inside, if there is such a case, the
internal welding machine should be dried. Then measured with a mugger insulation of the
welding machine (including the connections between nodes and the connection point
with the case of companies). Only confirms that no unusual circumstances, can continue
to welding work.
(5) Regular inspections for damage the cable insulation, if any, to wrap or replace the
cable.
(6) If not using welding machine, welding machine should be back in the box and kept in a
dry environment.