Ronch Ronch Weld 200MP, Руководство пользователя

Страница: 7 / 25

Wear ear plugs when welding out of position or in confined places. Always wear safety
glasses with side shields when in a welding area.

Connect the work cable to the work as close to the welding area as practical. Work cables
connected to the building framework or other locations away from the welding area
increase the possibility of the welding current passing through lifting chains, crane cables
or other alternate circuits. This can create fire hazards or overheat lifting chains or cables
until they fail.
Rotating parts may be dangerous.

Use only compressed gas cylinders containing the correct shielding gas for the process
used and properly operating regulators designed for the gas and pressure used. All hoses,
fittings, etc. should be suitable for the application and maintained in good condition.

Always keep cylinders in an upright position securely chained to an undercarriage or fixed
support.

Cylinders should be located:
- Away from areas where they may be struck or subjected to physical damage.
- A safe distance from arc welding or cutting operations and any other source of heat,
sparks, or flame.

Never allow the electrode, electrode holder or any other electrically “hot” parts to touch
a cylinder.

Keep your head and face away from the cylinder valve outlet when opening the cylinder
valve.

Valve protection caps should always be in place and hand tight except when the cylinder
is in use or connected for use.
• 1.3. The knowledge of Electric and Magnetic Fields
Electric current flowing through any conductor causes localized Electric and Magnetic Fields
(EMF). The discussion on the effect of EMF is ongoing all the world. Up to now, no material
evidences show that EMF may have effects on health. However, the research on damage of EMF
is still ongoing. Before any conclusion, we should minimize exposure to EMF as few as possible.
In order to minimize EMF, we should use the following procedures:

Route the electrode and work cables together – Secure them with tape when possible.

All cables should be put away and far from the operator.

Never coil the power cable around your body.

Make sure welding machine and power cable to be far away from the operator as far as
possible according to the actual circumstance.