Ronch Ronch Weld 200MP, Руководство пользователя

Страница: 20 / 25

• 4.3. Welding parameters
Wire diameter (mm) Welding current (A) Plate thickness (mm)
0.6 25-110 1.0-1.6
0.8 35-160(200) 1.0-2.3
0.9 45-160(200) 1.0-2.3
1.0 45-160(200) 1.2-6
• 4.4. Operation environment

Height above sea level ≤1000 M

Operation temperature range -10
～
+40
℃
.

Air relative humidity is below 90 %( 20
℃
).

Preferable site the machine some angles above the floor level, the maximum angle does
not exceed 15
℃
.

Protect the machine against heavy rain or in hot circumstance against direct sunshine.

The content of dust, acid, corrosive gas in the surrounding air or substance can not
exceed normal standard.

Take care that there is sufficient ventilation during welding. There is at least 30cm free
distance between the machine and wall.
• 4.5. Operation Notices

Read §1 carefully before attempting to use this equipment.

Connect the ground wire with the machine directly and refer to §3.5.

Ensure that the input is single-phase: 50/60Hz, 110V/220V±10%.

Before operation, no concerned people should be left. Do not watch the arc in
unprotected eyes.

Ensure good ventilation of the machine to improve duty ratio.

Turn off the engine when the operation finished for economize energy sources.

When power switch shuts off protectively because of failure. Don’t restart it until problem
is resolved. Otherwise, the range of problem will be extended.

In case of problems, contact your local dealer if no our authorized maintenance man.