2.
When all the Bumpas are correctly linked together, plug in the power supply at the
wall. Make sure that all the Bumpas are working before securing them to the wall.
3.
Use the mirror plates attached to the Bumpas to secure the Bumpas to the wall. Each
Bumpa has a mirror plate at the top and another at the bottom.
4.
When attaching these to the wall, bear in mind the following:
Fixings (e.g. screws) are not included
The construction of your wall – make sure the screws, fixings etc you purchase are
appropriate to the construction of the wall and the weight of each Bumpa – approx
5kg
Do not place any strain on the daisy-chain links between the Bumpas so as not to
disconnect these
Any floor cushioning to be installed – allow room for this
5.
Make sure there are no cables, pipes etc behind the Bumpas where you intend to drill.
6.
Make sure the product is properly assembled and stable before each use.
OPERATION
1.
Press the Bumpa to activate vibration. The two circles stitched on each indicate where
you need to press:
