2.
There is no ON/OFF switch on the product itself.
3.
There is no intensity controller – the intensity cannot be regulated.
4.
The vibration creates some noise – this is normal and should not be considered a
defect.
14.
Care and Maintenance
For indoor use only.
Always supervise the use of resources.
Organise a regular cleaning schedule.
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by
hard objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects
coming into contact with the surface.
Check seams regularly to ensure that these are not worn or split and the interior
filling cannot be accessed.
Wipe off accidental marks/liquids at the time they occur or are noticed.
From time to time, if possible, lift floor cushion or move furniture to clean all
surfaces and the floor underneath.
Furniture and cushioning is intended to provide comfort and relaxation. Avoid eating
and drinking whilst using these products.
If the material for your furniture can be steam cleaned, please exercise great caution
for the simple reason that when creating furniture, seams and stitching are
necessary which create tiny holes where it is possible for liquid to get through into
the inner foam. Should a lot of steam/water be accidentally used, there is potential
for the inner foam to get saturated and be detrimental to your furniture.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect material over time.
Do not saturate the material with lots of water.
Some of our products contain zips for manufacturing purposes only. Do not attempt to
open these or to access the interior part of these products. Never allow children or
vulnerable people to access the interior part of this product.
PVC (Vinyl)
Use a soft brush remove all loose dust/dirt
Clean with a mild detergent (such as Lux soap flakes in luke-warm solution) applied to a
sponge or damp cloth.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use an abrasive cleaning pad.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or solvent
based cleaner as this will cause the coating to discolour and go hard.
