14. Care and Maintenance
Always switch the projector off, unplug and allow to cool before moving, storing and
before all maintenance e.g. changing a fuse. If storing, wrap the cable loosely around the
projector once completely cool.
The fixture should only be cleaned with a dry cloth, ensuring the fans are free from dust.
Use a soft tissue or lens cloth with a little methylated spirit or pure alcohol. Make sure all
parts are completely dry before refitting.
After six months (or 1000hrs) usage the optical system might need cleaning. Switch off
the projector, disconnect from the mains.
Remove the four cover plate screws and remove the cover plate. There is no need to
remove the mounting bracket.
Use a soft tissue or lens cloth with a little methylated spirit or pure alcohol to clean the focusing
lens.
Do not touch the LED module - it may fail if touched.
Carefully re-fit the cover and replace all four screws.
For any repairs, please contact ROMPA®. Do not attempt to repair this product yourself.
Once this product is eventually exhausted, please dispose of it responsibly and appropriately.
