
The classical music loaded on the Colour Match Panel by ROMPA® is as follows:
Track 1: Vivaldi - Spring
Track 2: Grieg – Peer Gynt
Track 3: Greensleeves
Track 4: Bach – Minuet in G
Track 5: Mozart – Eine Kleine Nachtmusik
Track 6: Beethoven – Ode to Joy
Track 7: Mozart – Rondo Alla Turca
Track 8: Bizet - Carmen
Track 9: Beethoven – Symphony No. 5
Track 10: Delibes – Sylvia: Pizzicato
Note
:
In the unlikely event that you must remove the front of the panel, please remove the
MP3 card first and store it somewhere safe! Make sure the panel front is replaced
properly (pushed on as far as possible) to avoid the possibility of the slot for the MP3
card not aligning with the internal MP3 player. If the cover is not properly replaced, the
MP3 card could fall inside the panel rather than going into the correct opening.
11.
Safety
Always supervise the use of this product.
12.
Technical Specification
Size:
115 x 72.5 x 11 cm
Weight:
21kg
Input:
100-240v AC 50/60Hz 0.7A
Output:
12v DC 5A 60W max
Cover:
phthalate-free
CE:
This panel meets the requirements of BS EN 9001-2000
Other:
UL, CUL approved
13.
Installation
1.
Choose a safe and suitable location for your panel. The panel is ONLY to be used in
dry environments. The ambient temperature should not exceed 40°C.
2.
No fixings are included in this product for the wall. When fixing it to the wall please
consult a suitably qualified professional builder or from an estates department to
understand the construction of the wall the panel is to be fixed to, so that the
correct fittings can be used
3.
Attach fixings such as mirror plates to the back of the panel. Check the fixings e.g.
mirror plates you buy can easily support 20kg. You may wish to attach two mirror
plates to the back of the panel at the top and two on the back at the bottom. When
attaching fixings to the back of the panel please proceed with caution – be aware
that there are electrical assemblies inside the panel.