Rompa 19209, Руководство пользователя, Страница: 4 / 21

If the user has not successfully remembered the correct sequence of lights after 60
seconds, the sequence is repeated.
The Colour Match Panel by ROMPA® can be adjusted to meet the needs of the user;
the time that a rectangle is lit before it goes out in Mode 3 can be adjusted as follows:
1.
Turn off the Colour Match Panel by ROMPA®
2. Switch the Mode Switch to MODE 3
3. Hold one of the 4 coloured buttons on the front of the panel to indicate the interval
time you require. The options are:

RED = ½ s

GREEN = 1 s

BLUE = 2 s

YELLOW = 4 s
4.
Whilst holding your chosen button, turn on the Colour Match Panel by ROMPA®
5. Once the setting has been stored, you will see a number of squares flash RED 5
times. The number of flashing squares corresponds to the setting you have just
made.

1 x RED = ½ s

2 x RED = 1 s

3 x RED = 2 s

4 x RED = 4 s
6.
You can release the button you are holding as soon as you see the RED squares start
to flash.
In order to see what the current setting is for the Mode 3 interval timer, please
follow the following procedure:

Turn off the Colour Match Panel by ROMPA®

Switch the Mode Switch to MODE 3

Turn on the Colour Match Panel by ROMPA®

A number of squares will flash 5 times. The number of squares flashing corresponds
to the setting. (See point 5 above)

After 5 flashes the Mode 3 Game begins.
MP3 Player
This panel also has a built-in MP3 player with selection of classical music. The MP3
player memory card may be removed and programmed with user’s own choice of
music. Insert the MP3 Memory card into the MP3 SD card slot at the top of the unit.
The card label faces the back of the panel on insertion. To be able to download your
own choice of music simply remove the memory card and insert into your PC / memory
card reader to download music. The maximum number of songs allowable is 10, and
should be renamed B01 through B10 via your PC.