13.
Installation
Plug the power supply unit into the socket
C
on the side of the Voice Responsive Dome.
Only use the power supply provided.
Connect the Power Supply Unit to the mains electricity supply.
The unit is activated when a sound (e.g. a voice/clapping) is detected.
Please note
: this product remains illuminated until switched off – it will light up when
switched on and then will go off until a noise activates it again. When there is no noise,
the product will not be activated. Each change in sound produces a different colour.
Colours follow in sequence. It is not possible to select one single colour.
The sensitivity can be controlled by adjusting the knob
B
on the rim of the unit.
14.
Care and Maintenance
Wash the exterior of the Voice Responsive Dome with a slightly soapy cloth.
Wipe away the excess soap with a damp cloth.
Never use solvents or liquid detergents on the surface of the dome.
There is no need to attempt to access the interior of the dome – the light is produced by
LED. It is highly unlikely that these will require any maintenance. Do not remove the
securing pins
A
.
Once this product is eventually exhausted, please dispose of it appropriately.
