27
Standby mode
The appliance is equipped with a standby mode. When the standby mode is active, the display of the
appliance is off. 1 minute after the end of the preparation (incl. keep-warm function) the appliance switches
to standby mode.
For activating the appliance from the standby mode, first place the glass jug on the
base unit and then either press the button “Menu” or “Boiling”.
Pressing the button is confirmed by a signal tone.
Selecting programme / function
NOTE:
The appliance can be switched from standby mode to selection-mode by pressing the button
“Menu” or “Boiling” (see point “Standby mode”).
• Switch between the pre-set programmes by pressing the button “Menu“.
Pressing a button is confirmed by a signal tone.
• The display shows the set temperature and the pilot lamp of the selected
programme is lit.
NOTE:
When there have been multiple preparations one after the other
(appliance has not been separated from the mains by pulling the mains plug),
the recently used programme is shown.
• After selecting the programme, the buttons “Time/Temp“ and ”Start/Stop“
are flashing.
NOTE:
If within 1 minute no further button is pressed, the appliance switches to
standby mode and the display is off.
