24
Portion-controlled grinding (with scale function)
• Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
• Press the button several times if necessary to fi nd the desired function.
• Place the supplied powder container resp. another suitable container on the
scale plate. If the display shows the symbol for “tare-setting”, the container
must be re-adjusted. (See page 22) “Checking resp. re-setting the tare weight“).
• The display shows the symbol for “portion-controlled grinding“.
Default setting is “2“ cups (for each cup, 7 g powder are pre-set).
• Press the button “-“ to reduce the number of cups to 1 cup.
• Press the button “+“ to increase the number of cups up to 12 cups.
• To start, press the button “On/Off“.
If you select 4 cups e.g., the display shows “0/1/2/3/4“ in the same order.
• After the grinding process, the appliance stops automatically. This is indicated
by a multiple beep and the display shows the selected number of cups.
NOTE:
Press the button “On/Off“ once again to stop the grinding process at
any time.
• For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
Time-controlled grinding (without scale function)
• Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
• Press the button several times if necessary to fi nd the desired function.
• Place the supplied powder container resp. another suitable container on the
scale plate.
• The display shows the symbol for “time-controlled grinding“.
Default setting is “15“ seconds.
• Press the button “-“ to reduce the time to 1 seconds.
• Press the button “+“ to increase the time up to 60 seconds.
• To start, press the button “On/Off“.
If you select 20 seconds e.g., the display shows “20/19/18/…/3/2/1/0“ in the
same order.
• After the grinding process, the appliance stops automatically. This is indicated
by a multiple beep and the display shows the selected time.
NOTE:
Press the button “On/Off“ once again to stop the grinding process at
any time.
• For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
