Romik 2137 2D Скачать руководство пользователя страница 3

Страница: 3 / 6

Installation Instructions 2137-2D / 3D Bracket Kit

Step 5:

Pre-assemble passenger side front bracket. Locate mounting points and install provided HTC 243 and

M10 bolt If equiped with mudflaps please review step 2 .

Step 6:

Install pre-assembled bracket do not tighten

Step 7:

Pre-assemble bracket pass second bracket as shown on Figure 11, install provided HTC 243 as

shown on Figure 12. Install pre-assembled bracket as shown on Figure 9. Do not tighten

Step 8:

Middle brackets

do not require pre-assembly clean factory threads Figure 12 and install using supplied

M8 hardware.

Note some models do not have threaded inserts on bottom mount and may require

tapping to M8 25

proceed to install do not tighten

Figure 9

Figure 10

HTC 243

M10

Figure 12

HTC 243

Figure 11

Содержание 2137 2D

Страница 1: ...3 4 5 Installation Time 90 Min Hardware Torque Specifications M6 Bolt 3 ft lbs M8 Bolt 7 ft lbs M10 Bolt 16 ft lbs M12 Bolt 28 ft lbs ATTENTION Use correct torque settings to avoid damaging the running boards and or mounting brackets Failure to do so will void your warranty If you have any questions please contact our technical team at 1 866 717 6645 ...

Страница 5: ...aced on a soft surface to avoid scratching Step 2 Remove plastic endcap as shown on Figure A1 A4 keep screws as they will be re used Step 3 Remove Romik Connect plate and assemble as show on Figure B1 B3 using original screws Join two running boards together using supplied M8 bolts torque to 7 ft lbs Step 4 Install running boards as per last page of this manual ...