Romik 2137 2D Скачать руководство пользователя страница 4

Страница: 4 / 6

Installation Instructions 2137-2D / 3D Bracket Kit

Step 9:

Note: If your vehicle is a short wheel base please skip to Step 9

Pre-assemble last bracket

and install

provided HTC 243 as show Figure 13. Install pre-assembled bracket Figure 14 do not tighten

Step 10

: This step is for short wheel base models only, if you have completed step 8 please proceed to step

10, install provided HTC 243 and attach bracket Figure 15. Do not tighten

Step 11:

Proceed to last page of this manual for running board install instructions and torque values

For Technical support please call our team at 1-866-717-6645 and one of our experts will assist

you with this installation.

Thank you for choosing Romik.

Figure 13

Figure 14

Figure 15

HTC 243

Содержание 2137 2D

Страница 1: ...3 4 5 Installation Time 90 Min Hardware Torque Specifications M6 Bolt 3 ft lbs M8 Bolt 7 ft lbs M10 Bolt 16 ft lbs M12 Bolt 28 ft lbs ATTENTION Use correct torque settings to avoid damaging the running boards and or mounting brackets Failure to do so will void your warranty If you have any questions please contact our technical team at 1 866 717 6645 ...

Страница 5: ...aced on a soft surface to avoid scratching Step 2 Remove plastic endcap as shown on Figure A1 A4 keep screws as they will be re used Step 3 Remove Romik Connect plate and assemble as show on Figure B1 B3 using original screws Join two running boards together using supplied M8 bolts torque to 7 ft lbs Step 4 Install running boards as per last page of this manual ...