14
Q / A and Troubleshooting
1.
Is the EZ PUSH TO compatible with my Dob ?
So far, GSO ever ODM many brands Dob. The feature is plastic black covers on both
sides to adjust the tension. EZ PUSH TO is directly compatible with them.
2.
Why does my Dob performs poor repeatability?
Because of loose parts, the encoder module slightly moves relatively when rotating.
Please fasten the encoder magnets (part #6), and
glue the AZ module with thick
rubber pad (part #11)
. It is very important to glue the AZ module. Then do the
repeatability again to make sure parts on where they should be. If necessary,
lubricate the sensor magnets
for less friction.
And, make sure the AZ encoder magnet as perfectly centering as possible
when
rotating the base. If not, adjust its centering by hitting the top side(4mm part) of the
main column with rubber or wooden hammer slightly.
