ROME TRCW-20, Руководство оператора

Страница: 51 / 66

51
MAINTENANCE
ATTACHING DISC GANGS TO STANDARDS
CAUTION: Use suitable lifting devices
or support stands to prevent disc
from falling. Block disc gang when
not rolling it into place. Wear gloves and other
safety equipment to avoid injury.
Where lifting facilities are available:
1. Position front gang assembly with concave side
of discs to right, as viewed from the rear.
2. Position rear gang assembly with concave side
of discs to left, as viewed from rear.
3. Place gang carriers on corresponding gang
assemblies and attach to bearing standards with
bearing hex bolts, hex jam nuts, hex nuts, and
bearing wear plates.
Where lifting facilities are limited:
1. Position gang carriers upside down.
Place gang assemblies on gang carriers and attach
to bearing standards with bearing hex bolts, hex
jam nuts, hex nuts, and bearing wear plates.
2. Turn complete assemblies of gangs and gang
carriers right side up.