ROME TRCW-20, Руководство оператора

Страница: 50 / 66

50
MAINTENANCE
TIGHEN GANG AXLE NUTS -
2 ½” GANG AXLE
CAUTION: Wear gloves and other
safety equipment to avoid injury.
Oil threads on axle and using the axle nut
wrenches provided, tighten the axle nuts as tightly
as possible. For best results and added leverage,
place an (8) eight or (10) ten foot length of 2 inch
pipe on each axle nut wrench to serve as an
extension of the handle and hit it with a hammer.
Using a torque wrench, check to be sure that the
recommended ft. /lbs. torque has been achieved.
See the Torque Chart to the right for the proper
torque setting of your particular gang axle nut size.
Mount the axle nut lock to either the bumper
washer or the axle washer and secure axle nut with
bolt and lock washer.
Important: Re-tighten axle nuts after the first 10-
12 hours of operation.
Thereafter, visually inspect
axle nuts daily for tightness and retighten as
necessary to ensure that proper torque requirement
is maintained.
AXLE DIAMETER FEET/POUNDS OF TORQUE
1 ½”
1200-1500 FT./LBS.
1 5/8”
1600-1800 FT./LBS.
2 1/8”
1800-2000 FT./LBS
2 ½”
2000-2200 FT./LBS.
3 ¼”
2400-2600 FT./LBS.