Step 5 - Fitting the Door
1. Remove the Handle Assembly from it’s packaging and reassemble onto the Door Glass, ensure that the
set screws are fitted on the inside of the Door and all gaskets are used between the glass and metal parts.
2. Ensure that you have the Door Glass the correct way round.
3. Unpack the Hinge Assemblies and remove the backplates and gaskets from each.
4. Prior to fitting the Hinge Assemblies ensure that 2 Bottom Packers are placed between the Hinge and the
bottom of the glass cut-out and 1 Top Packer is placed between the Hinge and the top glass cut-out.
5. Reassemble the Hinge Assemblies onto the Hinge Panel Glass ensuring the gaskets are fitted as shown and
the Packers are in place. Keep the Hinges horizontal and tighten the screws with the Allen Key (supplied).
• IMPORTANT: The screws must be tightened to 10 N/m max.
6. Fully open the Hinge Assemblies ready for fitting the Door Glass.
①
Top
②
Bottom
Long
Short
Set Screw
Set Screw
Bottom of Cut-out
Top of Cut-out
1 Top Packer
2 Bottom Packers
④
④
2 Large Packers
⑤
③⑤
Panel
B
A
A
A
A
C
Inside
Outside
Short
⑥
Panel
Inside
Outside
A
A
A
Long
Backplate
IMPORTANT: Take note how the hinge is assembled and what goes where i.e. Short backplate on the Panel
side, gasket “C” and “B” on the inside of the glass. Likewise one of the “A” gaskets on the inside of the Door.
