Step 4 - Fitting the Moveable panel
1. Using the 4mm Allen key (supplied) remove the countersink screw and Top Pivot Assembly from the Fixed
Panel.
2. Ensure that the Moveable Panel is the correct way before fitting, the “P” shaped extrusion should be
positioned so that the Flat Face is to the inside of the showering area and the Round Face to the outside.
3. Offer the Moveable Panel onto the bottom Pivot Assembly then reattached the top Pivot Assembly so the
panel is then secured into position.
4. With the deflector facing inward push the Bottom Seal up onto the bottom of the Moveable Panel and also
along until it butts up against the aluminium profile (trim to length if required)..
•
please take care when cutting the bottom seal.
• Make sure the bottom seal is butted up against the aluminium profile.
①
↓
↓
②
Flat
Face
Round
Face
