12
Install the Gear Boxes
1. With the truck body still on its back, locate the two holes on either side of the
truck body with the white gearbox connector and yellow gearbox connector.
2. Insert the gearbox wire into the hole on the truck body. Slide the left gear box (1)
onto the rear axle with the white gears facing out until it sits completely in the gear
box bracket and the silver cylindrical end fits completely into the hole that leads to
the battery compartment.
3. Repeat the same steps on the other side of the truck with the right gear box.
4. The gearbox wiring connection will be completed on page 15.
