EN
34
Proper use / operational conditions
i
Only use the tubular motors for opening and closing roller shutters
and awnings.
IMPORtANt
◆
In the event of outside installation the motor cable must be laid on a suitable empty
tube up to the junction box under observation of local electrical regulations.
◆
Only use the manufacturer’s original parts and accessories.
Only use tubular motors which correspond to the local conditions in
terms of their output. Incorrectly dimensioned tubular motors can lead
to damage:
◆
An insufficiently dimensioned tubular motor can be damaged due
to overloading.
◆
An excessively dimensioned tubular motor can cause damage, for
example, to the roller shutters and roller shutter casing when
configuring the automatic end-point setting.
Consult a specialist dealer when selecting the tubular motor and observe our tractive
force specifications on our website:
www.rademacher.de
Operating conditions
◆
A 230 V/50 Hz power supply, together with a site-provided isolating device (fuse,
MCB), must be permanently available at the installation location.
◆
The installation and operation of the DuoFern radio system and its components is
only permitted for those systems and devices where a malfunction in the transmitter
or receiver would not cause a danger to personnel or property or where this risk is
already covered by other safety equipment.
Danger due to electric shock when working on all electrical systems.
◆
The electrical connection for the tubular motor and all work on the electrical systems
may only be undertaken by an authorised qualified electrician and in accordance with the
connection diagrams in these instructions, see pages 42/43/44.
◆
Carry out all installation and connection work only in an isolated, deenergised state.
Mortal danger in the event of failure to observe these instructions!
◆
Observe the regulations regarding installation in damp rooms.
◆
Especially observe DIN VDE 0100, parts 701 and 702 when installing in damp rooms.
These regulations contain mandatory protective measures.
the use of defective equipment can lead to personal injury and damage
to property (electric shocks, short circuiting).
◆
Never use defective or damaged equipment.
◆
Check the drive and mains cable beforehand for damage.
◆
Consult our customer service department (see page 56) in the event that you discover
damage on the equipment.
According DIN EN 13659, it is necessary to determine that the movement
conditions for the shutters are maintained in accordance with EN 12045.
The displacement must amount to at least 40 mm on the lower edge in the
rolled-out position with a force of 150 N in the upwards direction. In doing
so, it must be ensured that the extending speed of the shutters for the final
0.4 m is less than 0.2 m/s.
Potential risk to life and limb resulting from uncontrolled starting of
the drive.
Never attempt to manually stop the motor/shutters in the event of uncontrolled
movement. In such cases, switch off all power to the drive and take appropriate safety
precautions to prevent unintentional switching on. Arrange to have the system checked
by a specialist engineer.
general safety instructions
Incorrect use leads to an increased risk of injury.
◆
Train all personnel to safely use the tubular motor.
◆
Do not allow children to play with the fixed control units.
◆
Do not allow children or persons with limited capabilities to use the fixed control units
or remote control systems.
For roller shutters:
◆
Watch the moving roller shutters and keep other people away from the area until
the movement has completed.
◆
Undertake all cleaning work on the roller shutters with the equipment disconnected
from the mains power.
For awning systems which can be operated out of sight of the operator:
◆
Awnings may not be operated if work is being carried out nearby (e.g. windows
being cleaned).
For automatically actuated awnings:
◆
Awnings must be disconnected from the power supply if work is being carried out
nearby.
Regular maintenance of awnings increases operational reliability.
◆
Check the awnings regularly for poor balance or damaged lines and springs.
◆
Have damaged awnings repaired by a specialist firm.
Contact with the drive housing can cause burns.
◆
The tubular motor gets hot during operation. Allow the motor to cool down prior to
undertaking any further work on the motor.
◆
Never touch the hot drive housing.
Incorrect use
i
Never use the tubular motor:
For systems with increased safety-relevant requirements or where there is an increased risk
of accidents. Such use would require additional safety equipment. Observe the respective
statutory regulations for the installation of such systems.
Never use the DuoFern radio system or its components for:
systems with increased safety-relevant requirements or where there is an increased risk
of accidents. Such use would require additional safety equipment. Observe the respective
statutory regulations for the installation of such systems.
