rollibot RolliTERRA, Руководство пользователя, Страница: 9 / 20

6
Section 3. Initial Setup
Before your RolliTerra can be used, some assembly and charging is needed. See the following
images and instructions.
3.1 Charging Base Assembly & Setup
Step 1. Place the charging base on a fl at, level area on the fl oor.
Step 2. Turn the charging base around so that its back faces the wall.
Step 3. If desired, use the compartment on the back to manage the charger’s cords. Additionally,
you may peel off the sticker on the back or use screw (not included) to securely fasten the
charging base to the wall.
Step 4. Plug the charger into the wall then plug the other end into back of the charging base.
When on, the charging base’s screen will display a time and other settings.
Step 5. To begin setting the time, press the clock key then use the + and – keys to select the
hour.
Step 6. Press the clock key then use the + and – keys to
select the minute.
Step 7. Press the clock then use the + and – keys to
select the day of the week. When adjusting day of the
week, + means forward one day while – means back
one day.
Step 8. Press the clock key to confi rm otherwise the
procedure will time out after about 7 seconds. A “CLK”
will display on screen to confi rm the current time has
been set.
I f the charger is disconnected from the base, the time will reset.
3.2 Charging for the First Time
Before using your vacuum for the fi rst time, it must be
charged. See the following images and instructions.
Charge according to these instructions, otherwise the
battery may sustain damage.
Step 1. When charging for the fi rst time, place the
RolliTerra in front of the charging base, making sure
that the pegs on the front of the unit touch the silver
plates on the front of the charging base.
Charging Port
Adhesive Tape Wall Plate Mounting
Clock Key
Timing Key
Timing +
1
GO
SET Su Mo Tu We Th Fr Sa
2
Clock