rollibot ROLLICOOL COOL 100H-20, Руководство пользователя

Страница: 16 / 24

16
RolliBot RolliCOOL 100H-20 Portable AC User Manual
Section 5. How to Use the RolliCool
The COOL100H-20 features a number of ways to keep comfortable. Most features can be used by
pressing the buttons on the unit’s control panel or via the app.
• In most cases, the app can be used as an alternative control method.
• You must attach the drainage hose to the upper draining opening when using cool or dehumidify modes. See Section 6.2
for more information.
• You must connect the exhaust pipe to the window for proper ventilation. See Section 3 (step 10) for more information.
5.1 – Timer
With this mode, the unit will automatically turn on or o and regulate temperature according to
the selected times.
• Turning on the timer mode when the unit is OFF will set the number of hours before the unit will turn on (see below).
• Turning on the timer mode when the unit is ON will set the number of hours the unit will turn o (see below).
• After setting the timer, the AC unit will enter timer mode. While in this mode, the unit will operate according to the
selected timer duration. Pressing the timer button again will turn timer mode o and cancel any duration setting.
To Set a Turn On Time
3. When the unit is OFF, press the timer button on the control panel.
4. Use the up and down buttons to select the time the AC unit will turn on. For example,
selecting “03” will prompt the unit to turn on in 3 hours.
5. After the selection is complete, the display’s Timing light will turn on.
When a schedule is active, the unit will not turn on if the chosen temperature is higher than the indoor temperature.
To Set a Shut off Time
1. When the unit is ON, press the timer button on the control panel.
2. Use the up and down buttons to select the time the AC unit will turn o . For example,
selecting “03” will prompt the unit to turn o in 3 hours.
3. After the selection is complete, the display will show the current indoor temperature and the
display’s TIMER light will turn on.
5.2 – Fan Mode
With this mode, the unit will turn on and begin using the fan to promote air circulation.
1. Press the power button on the control panel.
2. Press the mode button on the control panel until the display’s FAN light turns on.
3. Use the speed button to switch between fan speeds.
5.3 – Cool Mode
With this mode, the unit will turn on and regulate temperature as selected.
1. Press the power button on the control panel.
2. Press the mode button on the control panel until the display’s COOL light turns on.
3. Use the up and down buttons to set the desired temperature 62~86°F (16~30°C).
4. Use the speed button to switch between fan speeds.