rollibot ROLLICOOL COOL 100H-20, Руководство пользователя

Страница: 12 / 24

12
RolliBot RolliCOOL 100H-20 Portable AC User Manual
Step 9. Cut the weather seal according to the size of the window and stick it on the window
frame. Then install the assembled window kit into a gap between the window and the frame,
then frame. Push the window nearly closed to secure it. Turn the screw head to tighten or loosen
the screw fastener and adjust the sections as needed.
For smaller windows, the window kit can be cut for a better t, using a hacksaw or some other large cutting tool. Do not use
hand scissors, kitchen knives or other small cutting utensils.
Using the weather seal with the window kit is preferable, as it will create a better window seal; however, it may leave behind
residue that could be di cult to clean. While the weather seal is not included with your Rollicool, it is readily available at
most local hardware stores.
Step 10
. Align the outer connector with the window kit’s outlet, then a x the exhaust pipe
onto the window kit.
Do not skip this step. You must attach the exhaust pipe to the window kit for proper ventilation.
• Make sure the exhaust pipe is not bent or kinked as this may inhibit air ow and/or damage the unit.
• Make sure that the machine is placed in a at position and the air outlet is not blocked
• Make sure the machine is placed at least 11.8 in. (30 cm) away from the wall.
11.8 in.
11.8 in.
11.8 in.
11.8 in.
Window Kit
Window Kit
Weather Seal
(Not included)
Weather Seal
(Not included)
Weather Seal
(Not included)
Weather Seal
(Not included)