9
RolliBot RolliCool A20 Portable A/C with Heater User Manual
• Scheduling can be done and/or adjusted via the control panel, remote, or the app. See the following section for more
information about the remote. See Section 4 for information about the app.
• Press the up and down buttons together on the control panel to switch between Celsius and Fahrenheit.
2.4 – Remote Overview
The A20 features a remote with a digital display that can be used to control most of the unit’s
features.
Remote Buttons
Timer Button:
Press to turn timer mode on or off.
Mode Button:
Press to cycle between cool, dehumidify, fan,
and heat modes.
Vent Button:
Press to turn open or close the louvres.
Sleep Button:
Press to turn on sleep mode.
Power Button:
Press to turn the unit on or off.
-/+
Press to lower or raise temperature or adjust timer duration.
Fan Speed Button:
Press to cycle through 3 fan speeds.
°C/°F Button:
Press to toggle between Celsius and Fahrenheit.
• Avoid pressing two remote buttons simultaneously as this may cause malfunctions.
• Avoid using the remote in areas with extreme temperature fluctuations.
• If the remote will not be used for extended periods of time, remove the batteries.
• The remote control’s range is approximately 23 ft. Use it within this range.
• Use only two AAA batteries with the included remote. Do not mix old and new batteries or batteries from different brands.
Section 3. Setting Up the Unit
• Before using the unit, keep it upright for at least two hours.
• Do not use extension cords, plug adapters, power strips, etc. Only plug the unit into a grounded wall outlet.
• Do not use the unit in bathrooms or other excessively humid areas.
• After installation, keep the unit at least 20 in. from the walls at all times.
Sleep
Fan
Heat
Cool
Dry
Swing
