10
Rollerdor RD20X2ELL Control Box, Edition 2022/1
HOLIDAY MODE
ALARM FUNCTION
The “Holiday mode” allows the user to
temporarily lock the front cover buttons.
Note:
when the mode is activated, wireless and
wired input commands are still enabled.
For the alarm function you must install the speaker that has been
supplied, this should be screwed in to replace one of the glands
at the bottom of the box and the cable will be plugged into the
board at the bottom right corner next to terminal 22
(fig.14)
.
To test your alarm function, once the door is closed and the
courtesy light has gone out, use the manual crank to wind the
door open a little, you may need to lift and shake the base rail
to activate as the smooth motion of winding may not trigger the
alarm.
Press the
STOP
button in the front cover and keep
it pressed for 5 seconds.
The buzzer makes one beep.
ACTIVATION
Press
STOP
button in the front cover and keep it
pressed for 5 seconds.
The buzzer makes one beep and LED
starts to flash faster.
Press any button of any memorized transmitter
within 10 seconds.
The buzzer makes one beep and LED
turns off.
DEACTIVATION
Pictures are for illustration purposes only, connector blocks are not provided and further fittings may be required.
fig.14
