Roller Pro RP-HOPPER 4, Руководство пользователя

Страница: 11 / 12

10
Adjust the vibration on the handlebar
Adjust the vibration on handlebar:
If your head tube of the electric scooter is vibrating, use the supplied M5 hex wrench to tighten the
two screws at the folding mechanism.
Tyre valve extension:
If your electric scooter front and rear tyres are deflated, use an extension tube for the tyre valves to
inflate the tyres. First remove the valve cap, then screw the extension tube on the tyre valve and
connect the pump to inflate. Replace the valve caps after finished pumping.
Note:
Tire wear and tear is normal. The rate at which the tires deteriorate depends on riding style i.e.
casual riding may yield minimal wear while performance and/or heavy drifting may yield excessive
wear. To purchase tire replacements and/or for questions about your Rider’s E-Bike parts, please
visit our website: www.rollerpro.es
Tyre valve extension
HARMFUL SUBSTANCE
Name of
component
Harmful substance
Charger
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Battery
Tyre valve
Charging port
Master control board
Instrumentation
circuit board
Wheel motor
Scooter frame
Tyres
This table corresponds to SJ/11364.
O:Indicates that the content of this harmful substance in all homogeneous materials of this component is below the
limit prescribed in GB/T 26572.
X:Indicates that the content of this harmful substance in at least one homogeneous material of this component is
beyond the limit prescribed in GB/T 26572.