EN-22
CAPTURE MODE
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously once the
shutter release button is pressed. Secure the camera to a tripod or place it on a stable
surface.
1. Rotate
the
mode
dial
to , , , ,
, or
.
2. Press the power switch to turn on the
power.
3. Press the four-way controller (
S
/
) and
use (
S
) to select [Burst]. You can also
change the setting using four-way
controller (
WX
).
4. Press the
button to confirm the setting.
The
indicator is displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
In Burst mode, the flash mode will be set to
Flash Off
automatically.
Auto Bracket
In this mode, the camera automatically changes the exposure within a set range to take
three shots after you press the shutter release button once. Auto Bracket settings can be
combined with exposure compensation settings to extend the adjustment range.
1. Rotate
the
mode
dial
to , , , ,
, or
.
2. Press the power switch to turn on the
power.
3. Press the four-way controller (
S
/
) and
use (
S
) to select [AEB]. You can also
change the setting using the four-way
controller (
WX
).
4. Press the
button to confirm the setting.
The
indicator is displayed on the LCD monitor screen.
5. Press the shutter release button to capture the three images.
In AEB mode, the flash mode will be set to
Flash Off
automatically.
Captu
pture Mod
e Mode
Bu
Burst
OK :
OK :
Capture Mode
Burst
OK :
Captu
pture Mod
e Mode
AEB
AEB
OK :
OK :
Capture Mode
AEB
OK :
