Rollei dr4 Скачать руководство пользователя страница 137

Страница: 137 / 154

135

roubleshoot

ing

Playback/Deleting

Symptom

Cause

Remedy

Refer
to

Cannot Playback. Or the
Playback screen does not
come out.

The camera is not in Playback Mode. Press the Playback button.

P.35

The VIDEO/AV cable is not
connected properly.

Reconnect it properly.

P.38

The video format is set wrong.

Set to correct format.

P.108

The contents of SD
Memory Card cannot be
replayed. Or the Playback
screen does not come out.

No memory card is loaded. Or a
Memory Card with no stored images
is loaded.

Load a card with stored images.

P.20

You played back a Memory Card that
was not formatted by this device.

Load a card that was formatted and
stored on by this device.

P.20
P.96

You played back a Memory Card that
was not recorded normally.

Load a normally recorded card.

P.20

The SD Memory Card's contact
surfaces are dirty.

Wipe off with a soft, dry cloth.

There is something wrong with the
Memory Card.

Play another card and if there is nothing
wrong with it, the camera is OK. There
may be something wrong with the card,
so do not use it.

An image disappeared.

Batteries are running low.

If using alkaline batteries, replace the
batteries with a new set.

P.16

The camera was left unattended and
unused, so Auto Power-Off shut it off.

Turn the power back on.

P.21

Files cannot be deleted.

The file has been set to protect.

Release the protection.

P.85

The SD Memory Card is "locked".

Release the "Lock (write-protection)".

P.19

Cannot format a Memory
Card.

The SD Memory Card is "locked".

Release the "Lock (write-protection)".

P.19

JD2OEM̲QSG̲E.fm 135 ページ２００５年１月１３日木曜日午前１２時２７分

Содержание dr4



























































































































































Результаты поиска

Содержание dr4

Отзывы:

Похожие инструкции для dr4

Бренды по названию

Популярные бренды

Rollei dr4, Инструкция по эксплуатации

Результаты поиска

Содержание dr4

Отзывы:

Похожие инструкции для dr4

Бренды по названию

Популярные бренды