Rollei dr4, Инструкция по эксплуатации

Страница: 101 / 154

99
Changing Camera
S
e
ttings
Setting a Function to the adjust Button
(ADJ BTN.SET.)
Each time the adjust button is pressed, the camera displays the setting screen
in the order of exposure, white balance, and ISO sensitivity.
By using the [ADJ BTN.SET.] option, you can set a function to be activated
when the adjust button is pressed the fourth time.
To assign a function to the adjust button, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.95.
2.
Press the
"
" "
"
button to select [ADJ
BTN.SET.] and press the ok or
$ $ $ $
button.
3.
Press the
!" !" !" !"
buttons to select
the desired setting.
4.
Press the ok or
# # # #
button.
5.
If you pressed the
# # # #
button in
step 4, press also the menu button.
This setting will be used until you change it.
Note
If a function is set with [ADJ BTN.SET], the AF target shift function (P.63) available from the
adjust button at Macro shooting is activated when the adjust button is pressed the fifth time.
Reference
For how to use the adjust button, see P.49.
Possible Settings (Refer to)
OFF (Set at purchase)
QUALITY (PIC/QUALITY)
P.59
AF/MF (FOCUS) P.61
SHARP (SHARPNESS) P.64
PHOTOMETRY P.65
JD2OEM̲QSG̲E.fm 99 ページ ２００５年１月１３日 木曜日 午前１２時２７分