132
Troubleshooting
Troubleshooting the Camera
Power Supply
Symptom
Cause
Remedy
Refer
to
The power does not come
on.
Batteries are not loaded. Or they are
exhausted.
Load the batteries correctly.
P.20
P.139
P.140
Because the camera overheated the
power was automatically turned off.
Wait until the temperature of the camera
returns to normal. Do not attempt to cool
the camera suddenly.
P.21
The camre is automatically turned off
by Auto Power-off.
Slide the power switch to close the lens
cover once (power-off) and slide it again
to open (power-on).
P.21
The power cuts out during
use.
The camera was left unattended and
unused, so Auto Power-Off shut it off.
Slide the power switch to close the lens
cover once (power-off) and slide it again
to open (power-on).
P.21
Batteries are running low.
If using alkaline batteries, replace the
batteries with a new set.
P.16
The power does not go
off.
Camera malfunction.
Remove batteries once and load them
again.
P.20
P.139
P.140
Cannot recharge the
batteries.
Battery life.
Replace the batteries with a new set.
P.16
Batteries run out quickly.
They are being used in extreme high
or low temperatures.
-
-
Many shots are being taken in dark
places inside, requiring flash.
-
-
JD2OEM̲QSG̲E.fm 132 ページ 2005年1月13日 木曜日 午前12時27分
Содержание dr4
