Rollei dk3000, Руководство пользователя

Страница: 30 / 31

28
Note
:
z
If use the Mass Storage Function, the mode dial must turn to “
PLAY “.
Attention
:
z
If you disconnect the cable before close the Mass Storage, the
Storage Destination (the hard disk) will be damaged.
„
Video Capture
z
Driver Installation
The steps are as below:
1. Insert the software CD-ROM disc into your CD-ROM drive.
2. The setup program starts. Follow the on screen instruction to
complete the camera driver installation.
ˆ ˆ ˆ ˆ ˆ
Video Capture Function
1. Turn on the power of your PC.
2. Turn on the power of your camera.
3. Set the Mode Dial to MOTION.
4. Use the USB cable to connect the camera and PC.
5. Double click “Presto! VideoWorks 4.5” to Run VideoWorks.
6. Click ” Capture Video ” Button. Pop Play dialog, then click “ Setting “
Button , Select Video Device to “JD 3.3 x4ie Video for Windows ”.
7. Click “PLAY” Button to start.
Note :
z
If use the Video Capture Function, the mode dial must turn to
“ MOTION “.
z
The LED on front will lit-on in green when the PC and Camera is
connected properly.
Attention :
During Previewing and Capturing, please do not try to disconnect the
USB cable as this could result in malfunction of the camera and the PC.
User must turn off the Application Software first before disconnect the
cable.