32
ENGLISH
7. Setting Mode
USB-UPLOAD
In this mode you can access your SD card from your computer .
Note:
While connected to a computer, you cannot use the slide film scanner.
1. Use the supplied USB-C cable to connect the slide film scanner directly to a
computer .
2. Select USB-UPLOAD from the settings menu, then press the OK button [5] to
enter the USB-UPLOAD menu. Wait for the slide film scanner to connect to
the computer . This may take a few seconds .
When the connection is established, the computer recognises the slide film
scanner as an external device .
3. When you are finished, press the disconnect button and then disconnect the
USB-C cable.
FORMAT
Note!
If you format the inserted SD card, all files on that card will be deleted. Save the files you need on
your computer before formatting . If the SD card is not compatible, format it on your computer .
1 . Select FORMAT from the settings menu, then press the OK button [5] to enter
the format menu .
2 . Press the right button [4] to format the inserted SD card and go to the HOME
menu .
3 . Press the left button [3] to return to the current card submenu .
