68
This is how it works:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
69
This is how it works:
Bilder aufnehmen
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
PC linkup
Mode dial set to
transfer
icon
For as long as the camera is
connected to your computer
or data are being exchanged
between camera and
computer, observe the
following warnings:
• Do not switch the camera
off!
• Do not pull the USB cable!
• Do not move the mode
dial!
• Do not insert or remove
your memory card!
Leaving these warnings
unheeded may damage your
camera or computer and
damage or destroy the data
on your memory card.
As long as the camera is
connected to your PC, it will
automatically switch off
after 30 minutes.
Connecting the camera to
PC/Macintosh
When linking up your
camera with a computer and
transferring data, the
batteries should have full
power. If the batteries have
only limited power, there is a
risk that the camera will cut
off during data transmission.
An error message will be
displayed, and the camera
and computer may mal-
function. Also, the image
data on your memory card
might be damaged or
destroyed.
It is recommended always to
use fresh batteries or the
optional power-supply unit
when connecting the camera
to your computer.
A very safe and comfortable
means of transferring data is
the use of CompactFlash
card readers that are
connected to the USB
terminal or a PC or Macin-
tosh.
How to handle batteries
• Battery power drops at
low temperatures. When
shooting in a cold
environment, keep fresh
batteries ready, preferably
in a warm pocket inside
your clothing.
• The power of rechar-
geable NiMH batteries
drops more slowly, so that
these are therefore
preferable. Even after use
at low temperatures, they
will regain their normal
power as soon as they
have been restored to
normal temperature.
• Remove the batteries if
you are planning not to
use your camera for a
certain length of time.
Leaking batteries may
damage the battery
compartment.
• With alkaline batteries,
the battery-status
indicator may signal less
power than is actually
available. When you use
the camera, the icon
disappears.
• Caution! Batteries may get
hot during use and should
therefore be handled with
care when removing or
replacing them. Switch the
camera off and wait long
enough for the batteries to
cool down..
• Your camera has been
designed for operation at
temperatures from 0°C to
40°C.
• Never keep your camera
in a place where it might
be exposed to very high
temperatures, for example
in the glove compartment
of a car.
• Do not expose your
camera to extreme
humidity.
• To avoid condensation,
keep your camera in a
light-tight plastic bag
before taking it from a
cold environment to a
warm room. Leave it to
adopt room temperature
before taking it out of the
bag.
Ambient temperature and
operating conditions
Tips and Tricks
