32
This is how it works:
This is how it looks:
This is what it‘s for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
33
This is how it works:
This is how it looks:
This is what it‘s for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
Switching to macro
autofocus
For close-up shots, switch to
macro autofocus.
Press the MENU button on
the camera back and use the
four-way control to select
Focusing. Then select Focus
and from there Close-up.
Confirm your selection by
pressing the Right arrow
of the four-way control.
If at all possible, mount your
camera on a tripod for
close-up shots.
Close-up photography
makes sense only if you use
the TFT screen for framing.
This is why the TFT screen
cannot be switched off in
this mode.
The built-in flash is unsuit-
able for close-range
photography. It is therefore
automatically disabled in the
close-up mode.
Macro autofocusing is
possible over a range of
0.08 to 0.4 m.
Manual focusing is helpful in
close-range photography
because the macro mode
lets you focus all the way
down to 8 cm (object field
approx. 4x6 cm).
Using the built-in flash
unit
The built-in flash unit has
five different modes that can
be selected with the
four-way control.
To select the desired mode,
press the Right arrow
of
the control.
When the light is low, the
flash will then fire auto-
matically.
Flash on.
Flash off.
Flash on with red-eye
reduction.
Slow sync – Flash is
synchronized with a slow
shutter speed.
Use this standard mode for
candid photography.
Shooting against the light,
this mode will help you fill in
deep foreground shadows (if
necessary, with reduced
output).
This is ideal for atmospheric
available-light shots in
situations where flash would
disturb the evocative mood
of the scene.
The flash emits preflashes to
reduce the risk of red eye
caused by reflection from
the retina.
Flash illuminates the
foreground, while a slow
shutter speed coaxes out
weak illumination in the
background.
Press the MENU button and
use the four-way control to
select Flash. Then select the
Mode subfunction.
Taking pictures
Mode dial set to Camera icon
Mode dial set to Camera icon
Taking pictures
