INITIAL SET UP
1. Install a micro SD memory card
(max up to 64GB work with class
6 or above) into the camera. Use
your fingernail to insert the micro
SD card into the slot. The micro
SD card will click into place once it
is inserted past flush.
* When using a micro SD memory
card, there should be no data
from other devices. If you are
using a micro SD memory card
for the first time in the camera,
first you should format the card in
your computer.
2. Place battery into the camera.
3. Charging the battery
The Lithium-Polymer battery comes partially charged. To charge, connect the included USB
cable to the camera and connect the other end of the cable to a power source such as AC
Charger. No damage will occur to the camera or battery if used prior to a full charge.
Power ON / OFF
Turn ON
Turn on the camera by pressing the Power button for at least
3 seconds until the red LED flashes.
Then the LCD screen will be ON.
Turn OFF
Turn the camera off by pressing the Power button in standby
mode for at least 3 seconds.
* To save power, the camera will automatically turn off if no button
is pressed for more than 3 minutes in standby mode.
Take a Video
To Start
Press the video button .
The red status indicator light will flash while recording.
To Stop
Press the video button again to stop recording.
Video Capture
Take pictures while video recording. Press the photo button .
* 1080i is not compatible with video capture function.
Image Rotation
The camera can be mounted Upside Down and the files appear
upright when viewing or editing.
Press and hold Menu > Setting > lmage rotation > Select OFF
or 180 Degrees
The camera automatically stops recording when the memory card is full or the battery
is out of power. Your video will be saved before the camera powers off.