Battery life
Battery icon will alert for low battery status. If recording is occurring when battery
reaches 0%, the camera will save the file and power OFF.
To charge the battery:
1. Connect the camera to a power source.
2. The red status indicator Light remains on while the battery is charging.
3. The red status indicator Light will turn OFF when the battery is fully charged.
The battery will charge to 100% in 4 hours when using 500mAh USB-compatible
AC wall charger. Other chargers may charge at only half this rate. No damage will
occur to the camera or the battery it used together prior to full charge.
To remove the battery:
1. Remove the battery door by placing your thumb in the indentation in the battery
door (on the back of the camera) and sliding it to the left,
2. Allow the door to pop out. Grasp the battery pull-tab and remove from the camera.
Preventing Water Damage To Your Camera
1. Keep the rubber seal clean with fresh water and dry after every use.
2. After every use in salt water, please rinse the housing with fresh water.
3. Clean the seal, rinse in fresh water and shake dry.
* Failure to follow these steps each time you use the camera can result in leaks that
may damage or destroy your camera. Your warranty does not cover water damage
resulting from user error.
Warning
The warranty does not cover any damage that may occur during a sport activity. It is
the users responsibility to secure the camera securely to any sport equipment.
TEMPERATURE WARNING
The camera has become too hot and needs to cool down after used 2 hours
(continuously recording). Simply let it sit and cool before attempting to use it again.
Your camera will not allow itself to overheat-do not worry, no damage has occurred.
