9
Power supply
– Use with power supply unit: Plug the supplied mains cable into
the mains cable connector [8] and screw the screw cap shut.
Slide the on/off switch [11] to the ”
“ symbol to switch on the
LED light.
– Use with rechargeable batteries: Place the batteries (optional,
not included) in the battery compartment and slide the on/off
switch [11] to the symbol ”
“ to switch on the LED light.
– Note: Rechargeable Batteries and charger are optionally avai-
lable from Rollei. Two NP-F750/970 Li-Ion batteries are required
for operation.
Lumen App
Download the Lumen App directly from the App or Google Play
Store (iOS 9.0 or higher, Android 5.0 or higher).
Connection with the smartphone
1. Activate Bluetooth
®
* on your smartphone
2. Switch on the Rollei Lumen Panel
3. Open the Lumen App, the connection to your phone will be
established automatically.
Note:
– The connection is established using ”Bluetooth Low Energy“
(BLE). For this, a location release of the app is required. The
connection to the LED light is established directly in the app.
CCT – Colour Temperature Mode
Adjust colour temperature and
brightness:
– After switching on, press the
CCT button [4].
– Turn the adjustment knob [7]
to the left or right to increase
or decrease the Kelvin value.
– The colour temperature can be
set between 2,700 K and 9,999 K in steps of hundreds.
– Press the CCT knob [4] again to increase the green component
of the selected colour temperature.
– The menu item ”GN“ is highlighted in the display and the green
component can be adjusted to the lighting situation by turning
the adjustment knob [7].
– Press the adjusting knob [7] to adjust the brightness. The menu
item ”BRT“ is highlighted in the display and the brightness can
be adjusted between 0 and 100% with the adjustment knob [7]
(steps: 20%, 21%, 22%, 23%, 24%, 25%, ...).
Save settings
Store colour temperatures and brightness:
– You have the option to save up to 8 different colour profiles.
– Select your desired colour temperature and brightness.
– Press the menu knob [9] and select the ”Preset Temp“ menu
by turning the setting knob [7]. Press the adjustment knob [7]
again to select the function.
– Now turn the adjusting knob [7] to select the different memory
locations.
– To save the set colour temperature and brightness, press the
setting knob [7] once.
– To recall the saved settings, press the menu knob [9], select
the ”Preset Temp“ menu and then turn the setting knob [7] to
select the memory location.
Motif Programmes
Instead of setting the colour temperature of the LED lights manual-
ly, you can also use various motif programmes.
These are preset lighting situations. Press the menu knob [9] and
select the menu „Light Source“ by turning the adjusting knob [7].
Turn the setting knob [7] again to select the function. Now select
a motif programme by turning the setting knob [7].
10: Tungsten bulb
11: Halogen bulb
12: Fluorescent soft white 3,200 K
13: Fluorescent warm white 3,600 K
14: Fluorescent white 4,300 K
15: Fluorescent daylight 5,000 K
16: Camera flash 5,500 K
17: Fluorescent daylight 6,700 K
18: Daylight cloudy 7,300 K
19: Daylight shadow 8,400 K
20: Daylight snow 9,500 K
Download on the
Содержание 28579
Страница 3: ......
