Page
9
of
14
Zipscreen Installation Manual | v4.2| August 2019
2019 ©Copyright All Rights Reserved Rollease Acmeda
STEP 7
–
PUT STOPS BACK INTO FUNNEL
If there is inadequate access to the back of the blind to attach stops, add only one to the front of the blind on both ends
STEP 8
–
OPERATE BLIND MULTIPLE TIMES TO ALLOW INNER RAIL TO MOVE INTO NATURAL POSITION
The inner rail should sit parallel with the zip to avoid strain or jamming of blind during
operation.
Ensure the zip is running inside the inner rail on both sides.
When using the Ultra-Lock, the Latch Housings must be level with each other to ensure
the Ultra-Lock Pins lock simultaneously.
Adjust the position of the Inner Rails as required.
STEP 9
–
SECURE THE INNER RAILS
