11
Easy Spring Plus
Roller Roman Fabrication
Clip Alignment: Clips should be spaced evenly alternating sides of lift cords. Always use an
uneven amount of clips, then place the middle clip to the left or right of middle lift cord. A
center cord is needed for the attachment of the pull ring.
15. Clips should be spaced evenly
using the Clip Offset Chart as a guide for spacing.
Shade
should be fully extended
during attachment.
Cord should come between tube and
headrail and over top of tube for
attachment. Center
tube clip
may go either to the right
or left
of the center lift cord column.
The clips should be offset “X
inches” from the lift cord
.
SEE CLIP OFFSET CHART
NOTE:
Do not use screw eyes
on this system.
Screw eyes
or
any style diverter
add extra
drag to the system, which will
prevent smooth operation.
X inches
Lift Cord
Column
Clips
Easy
Spring
Plus
CORDLESS SHADE SYSTEM
by Rollease Acmeda
CLIP OFFSET CHART