10
Easy Spring Plus
Roller Roman Fabrication
10. Insert spring end bracket into headrail and use screws
provided to secure in place.
11.
Insert spring end of tube into bracket with adjuster wheel.
12.
Install stop end bracket on the opposite end into head rail.
Align adjuster wheel with end of stopper and secure bracket
with
screws provided.
13.
With shade attached to mounting board, lay shade flat, back
side facing up. Bring lift cords up through rings
(preferably with Ring Locks attached), then between back of
shade and tube, and over top of tube. Feed lift cord through top
of clip and tie with knot on underside of clip so it can’t pull
through the hole.
ALWAYS USE THE SMALLEST HOLE ON THE
TUBE CLIP
(AS SHOWN IN ILLUS
D
)
AND THAT HOLE SHOULD BE
CLOSEST TO YOUR CORD LIFT COLUM
N (AS SHOWN IN ILLUS
E)
14.
Attach cord clips to tube with cord knot on side
nearest vertical cord lift line.
(see next page for clip
alignment)
Easy
Spring
Plus
CORDLESS SHADE SYSTEM
by Rollease Acmeda
A
B
C
D
D
knot
E
