rollease acmeda AUTOMATE AU, Руководство пользователя

Страница: 13 / 20

13 | Automate
™
Programming Instructions | FT Tubular Motors ROLLEASE ACMEDA
9 SLEEP MODE
Enter Sleep Mode
Sleep mode is utilized to
prevent a motor from incorrect
configuration during other
motor setup.
Hold P1 button on the motor
head
If multiple motors are grouped on a single channel, Sleep Mode may be used to put all but 1 motor to sleep,
allowing programming of just the one motor that remains “Awake”.
Exit Sleep Mode: Method 1
Exit sleep mode once the shade
is ready.
Press and release P1 button on
the motor head
Exit Sleep Mode: Method 2
Remove power and then
re-power the motor.
The Impact Detection feature only works in the active zone during downward movement (see Section 2.4).
All three modes have this impact detection feature deactivated by default (see Section 2.3).
Repeat sequence to turn on or off as required.
Motor Response
Motor Response
8 SLEEP MODE
Approx.
9 IMPACT DETECTION MODE
Press P2 on controller. Press DOWN on controller. Press DOWN on controller.
Impact Detection ON
Impact Detection OFF
Motor Response Motor Response
Motor Response
Motor Response
A 2 piece drive set must be used for impact detection to be functional. The use of a standard 1 part
drive adapter renders the impact detection feature in-operable.
The top tube must be able to freely rotate ~ 5 degrees after installation.
IMPORTANT