Cable/DSL Router User Guide
Figure 5-23 Add or Modify a Domain Filtering entry
To add or modify a Domain Filtering entry, follow these instructions:
1.
Domain Name
-
Type the domain or key word as desired in the field. A blank in the
domain field means all websites on the Internet.
For example:
www.xxyy.com.cn
, .net.
2.
Status
-
Select
Enabled
or
Disabled
for this entry on the
Status
pull-down list.
3. Click
the
Save
button to save this entry.
To add additional entries, repeat steps 1-3.
When finished, click the
Return
button to return to the
Domain filtering
page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify
or
Delete
as desired on the
Edit
column.
Click the
Enable All
button to enable all entries.
Click the
Disable All
button to disable all entries.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page and the
Previous
button to return to the
previous page.
For example:
if you want to block the PCs on your LAN from accessing websites
www.xxyy.com.cn
,
www.aabbcc.com
and websites with .net at the end on the Internet
while no limit for other websites. First, enable the
Firewall
and
Domain
Filtering
on the
Firewall
page, then, specify the following Domain filtering list:
5.7.4 MAC Filtering
Like the IP Address Filtering page, the MAC Address Filtering page (shown in figure 5-24)
allows you to control access to the Internet by users on your local network based on their
MAC addresses.
- 30 -
