background image

Unpacking

EVZM-01-V01R1 Installation and Operation Manual

Zura Intelligent EV Charging Unit

December 2022

Page 

16

of 

42

Unpacking

IMPORTANT: 

Make sure all packaging is disposed of responsibly and in accordance with 

the current regulations in your region.
Packaging is 100% recyclable where appropriate facilities exist.

Standard Contents

x

EV chargepoint

x

Rolec EV Connect Configuration Tag

x

VendElectric and Monta QR Code Socket ID Labels

x

Current Transformer (CT) device with cable.

x

Mounting Bracket

x

Fixing Kit (Qty 4, 4 x 50mm screws and wall plugs)

x

Installation and Operation Manual

1. Examine the package and make sure the contents have not been damaged in 

transit.

2. Make sure the chargepoint model and any accessories match the order.
3. Do NOT dispose of the packaging until the chargepoint has been installed and is 

working correctly.

x

Please dispose of packaging responsibly when it is appropriate to do so.

NOTE: 

Items damaged in transit must first be reported to the courier and then to the 

supplier. Where possible, photographic evidence of package and/or unit damage 

should be supplied.

NOTE: 

Incorrect or damaged units must NOT be installed. Contact your supplier to 

discuss rectification.

NOTE: 

If the supplied fixings are not suitable for the intended installation location, the 

installer must source and supply the correct fixings

Содержание ZURA ROLEC3020B













































Отзывы: