82
Advanced Use
❍
REVERB TIME (0–127)
Adjusts the length of the Reverb time. Higher values
result in longer reverberation.
❍
ORCHESTRAL TONES CHORUS LEVEL (0–127)
Specify the chorus level when the chorus effect is applied
to the Orchestral Tones ELECTRIC PIANO1 or ELECTRIC
PIANO2.
❍
D BEAM ROTARY SPEED MODE
(SLOW/FAST, CONTINUOUS)
Specify the D Beam function when ROTARY SPEED is
assigned to the D Beam.
Turn the [VIBRATO AND CHORUS] knob to the left to
select SLOW/FAST, or to the right to select
CONTINUOUS.
❍
ON CLICK LEVEL (0–31)
Specifies the level of the click sound that occurs when a
key is pressed (On).
Increasing this value will increase the volume.
❍
OFF CLICK LEVEL (0–31)
Specifies the level of the click sound that occurs when a
key is released (Off).
Increasing this value will increase the volume.
❍
UPPER ORCHESTRAL TONES EXPRESSION
(ON/OFF)
This setting determines whether or not the Expression is
applied to the Upper Orchestral Tones.
Turn the [VIBRATO AND CHORUS] knob to the right to
turn this on, or to the left to turn it off. At the factory
settings, this is turned on.
❍
LOWER ORCHESTRAL TONES EXPRESSION
(ON/OFF)
This setting determines whether or not the Expression is
applied to the Lower Orchestral Tones.
Turn the [VIBRATO AND CHORUS] knob to the right to
turn this on, or to the left to turn it off. At the factory
settings, this is turned on.
❍
PEDAL ORCHESTRAL TONES EXPRESSION
(ON/OFF)
This setting determines whether or not the Expression is
applied to the Pedal Orchestral Tones.
Turn the [VIBRATO AND CHORUS] knob to the right to
turn this on, or to the left to turn it off. At the factory
settings, this is turned on.
❍
UPPER ORCHESTRAL TONES OCTAVE SHIFT
(-2–0–+2)
Transpose the Upper Orchestral Tones in steps of an
octave.
❍
LOWER ORCHESTRAL TONES OCTAVE SHIFT
(-2–0–+2)
Transpose the Lower Orchestral Tones in steps of an
octave.
❍
PEDAL ORCHESTRAL TONES OCTAVE SHIFT
(-2–0–+2)
Transpose the Pedal Orchestral Tones in steps of an
octave.
❍
ORCHESTRAL TONES BEND RANGE
(ORCHESTRAL TONES Pitch Bend Range)
(0–24)
Specifies the width of pitch change that will occur when
you operate the bender. As this value is increased by one,
the range of pitch change that occurs when the bender is
moved to left or right will increase by one semitone. With
a setting of 24, the pitch will change two octaves up or
down when the bender is moved to right or left.
❍
ORCHESTRAL MODULATION SENSE
(ORCHESTRAL TONES Modulation Sensitivity)
(0–127)
Specifies the amount of pitch modulation change that will
occur when the modulation lever is operated. As this
value is increased, a stronger modulation becomes
possible. With a value of 0, moving the modulation lever
will not apply modulation.
❍
ORCHESTRAL TONES AFTERTOUCH SENSE
(ORCHESTRAL TONES Aftertouch Sensitivity)
(0–127)
Specifies the amount of pitch modulation that will occur
when you apply aftertouch. As this value is increased, a
stronger modulation becomes possible. With a value of 0,
applying aftertouch will not apply modulation.
Setting
Explanation
SLOW/FAST
The rotary effect is toggled between
slow and fast each time you move your
hand over the D Beam controller.
CONTINUOUS
The rotary effect will change gradually
from slow to fast or fast to slow as you
move your hand closer to the D Beam
controller.
VK-88_e.book 82 ページ ２００４年４月２０日 火曜日 午前９時０分
